Foldable solar panel FOSSiBOT SP200 Pro, 200 W, bifacial
In your cart: 0
Delivery options to:
Choose countryThe FOSSiBOT SP200 Pro is a foldable solar panel for charging compatible portable power stations when camping, travelling in a motorhome or during a power cut. Its maximum output under standard test conditions (STC) is 200 W.
Light capture and power output
The front of the bifacial panel captures direct sunlight while the rear captures light reflected from the ground. Under favourable conditions, particularly on pale surfaces, it can capture 10–15% more light than a single-sided panel. The monocrystalline cells have a declared conversion efficiency of up to 25%. Typical output is about 140–170 W, or 70–85% of maximum, depending on sunlight, temperature, orientation and shading.
Setup and connections
- Supports and transport. Built-in supports hold the panel at a fixed 35° tilt. The four-section panel weighs 6.5 kg and has carrying handles, an aluminium frame and reinforced plastic corner guards.
- Shade and outdoor use. Bypass diodes help limit power loss and reduce the risk of localised overheating when cells are partly shaded. IP67 indicates dust-tight construction and resistance to brief immersion under the conditions of that rating. Protect electrical connections outdoors as recommended by the manufacturer.
- Multiple panels. MC4 connectors allow series connections to increase voltage or parallel connections to increase current. Check the connected device’s permissible input voltage, current and power before connecting multiple panels.
| Manufacturer | FOSSiBOT |
|---|---|
| Model | SP200 Pro |
| Type | Foldable solar panel |
| Cell type | Monocrystalline |
| Technology | Bifacial |
| Maximum power (STC) | 200 W |
| Declared conversion efficiency | Up to 25% |
| Voltage at maximum power (Vmp) | 18.8 V |
| Current at maximum power (Imp) | 10.7 A |
| Open-circuit voltage (Voc) | 22.6 V |
| Short-circuit current (Isc) | 10.9 A |
| Connectors | MC4 |
| Number of sections | 4 |
| Tilt angle | 35° |
| Frame material | Aluminium |
| Protection rating | IP67 |
| Operating temperature | −10 °C to 70 °C |
| Unfolded dimensions | 2080 × 602 × 21.4 mm |
| Folded dimensions | 602 × 520 × 87.4 mm |
| Weight | 6.5 kg |
| Charging cable | MC4–XT60, 1.5 m |
| Compatible power stations | Including FOSSiBOT F1800, F2400, F3600 Pro and F7200 |
| EAN | 6942580508696 |
|---|
Which power stations can I connect with the included cable?
The 1.5 m MC4–XT60 cable connects the panel to a power station with a compatible solar charging input. Compatible models include the FOSSiBOT F1800, F2400, F3600 Pro and F7200.
What is included?
The kit includes the 200 W solar panel, a carrying bag, a 1.5 m MC4–XT60 solar charging cable and a user manual.
























Gudri pirkumi vienuviet