Portable oscilloscope FNIRSI 1013D, 2 channels, 100 MHz, 7″
In your cart: 0
Delivery options to:
Choose countryThe FNIRSI 1013D is a portable tablet oscilloscope for analysing analogue and digital signals in electronics repair and design. Its 2 channels let you compare signals simultaneously, such as the input and output of an amplifier. It has a 100 MHz bandwidth and a 1 GSa/s sampling rate.
Viewing and capturing signals
- Touch controls. Use the 7-inch capacitive touchscreen to zoom and pan waveforms and change measurement settings.
- Cursors and XY mode. Use cursors to read amplitude, period and frequency. In XY mode, use Lissajous figures to determine frequency, amplitude and the phase difference between signals.
- One-button setup. The oscilloscope adjusts the measurement settings and centres the waveform. It adjusts the settings for a 1 Vpp signal within 1 second.
- Trigger controls. Choose Single, Normal or Auto mode and select the trigger channel and a rising or falling edge.
The maximum test voltage is 40 V at the 1X probe setting and 400 V at 10X.
Storage and power
Save measurement results with a single touch. The 1 GB internal storage holds up to 1 000 images and 1 000 waveforms. You can browse waveform thumbnails, zoom in, take cursor measurements and delete records on the device. Data can be exported to a computer via USB.
The built-in 6 000 mAh lithium battery provides about 4 hours of operation and charges via USB-C at 5 V.
| Manufacturer | FNIRSI |
|---|---|
| Model | 1013D |
| Number of channels | 2 |
| LCD screen size | 7 inches |
| LCD resolution | 800 × 480 |
| Display technology | TFT |
| Bandwidth | 100 MHz |
| Sampling rate | 1 GSa/s |
| Maximum test voltage | 1X — 40 V, 10X — 400 V |
| Cursor settings | XY position, trigger Y position |
| Roll mode | Supported |
| One-button autoset | Supported |
| Waveform and image storage | Up to 1 000 images and 1 000 waveforms |
| Waveform manager | Supported |
| Voltage accuracy | ±2% |
| Rise time | < 3 ns |
| Memory depth | 240 kbit |
| Input resistance | 1 MΩ |
| Sensitivity | 50 mV–500 V |
| Time base | 50 s–10 ns |
| Trigger modes | Single, Normal, Auto |
| Trigger edge | Rising or falling |
| Input coupling | AC or DC |
| Frequency accuracy | ±0.01% |
| Measurement parameters | 12 types |
| Battery | Built-in lithium battery, 6 000 mAh |
| Operating time | About 4 hours |
| Data export | Via USB |
| Charging | USB-C, 5 V, 2 A / 3 A / 4 A |
| Dimensions | 184 × 124 × 50 mm |
| Touchscreen | Capacitive |
| Internal storage | 1 GB |
| XY mode | For analysing Lissajous figures |
| EAN | 5907085527086 |
|---|
Are probes and a charger included?
Yes. The box contains the oscilloscope, 2 probes with a bandwidth of 100 MHz, a USB charger and a user manual.












Gudri pirkumi vienuviet