Habotest HT208D digital clamp meter with True RMS
-22%
Delivery options to:
Choose countryThe Habotest HT208D is a digital clamp meter for measuring AC and DC current, voltage and other electrical parameters. It also measures temperature and inrush current, with results shown on a 6 000-count LCD.
Measurement functions
Current ranges extend to 1 000 A, DC voltage ranges to 1 000 V and AC voltage ranges to 750 V. The meter also measures resistance, capacitance, frequency and duty cycle, and provides continuity and diode testing.
- Signal measurement: True RMS, LPF and V-LoZ functions.
- Reading management: data hold and MAX/MIN mode.
- Non-contact voltage detection: NCV with LED and audible indication.
- Visibility: dual-colour display backlighting and a built-in torch.
Controls and power
Select ranges automatically or manually. The display turns orange when voltage or current is high. Automatic shut-off activates after 15 minutes of inactivity. The meter runs on 2 AA batteries, included in the box, and has a low-battery indicator.
| DC voltage | 6 V / 60 V / 600 V / 1 000 V; ±(1%+3) |
|---|---|
| AC voltage | 6 V / 60 V / 600 V / 750 V; ±(1.2%+3) |
| DC current | 60 A / 600 A / 1 000 A; ±(2.5%+5) |
| AC current | 60 A / 600 A / 1 000 A; ±(3.0%+5) |
| Resistance | 600 Ω / 6 kΩ / 60 kΩ / 600 kΩ / 6 MΩ / 60 MΩ; ±(1.0%+3) |
| Capacitance | 10 nF / 100 nF / 1 μF / 10 μF / 100 μF / 1 mF / 10 mF: ±(4.0%+3); 100 mF: ±(5.0%+5) |
| Frequency | 10 Hz / 100 Hz / 1 kHz / 10 kHz / 100 kHz / 1 MHz / 10 MHz; ±(1.0%+3) |
| Duty cycle | 1–99%; ±(1.0%+2) |
| Temperature | -40 °C to 1 000 °C; ±(1.0%+3) |
| Display counts | 6 000 |
| Automatic and manual ranging | Yes |
| Continuity test | Yes, LED and audible indication |
| Diode test | Yes |
| Data hold | Yes |
| Non-contact voltage detection (NCV) | Yes, LED and audible indication |
| Dual-colour backlight | Yes |
| Torch | Yes |
| Low-battery indicator | Yes |
| Automatic power-off | Yes, after 15 minutes of inactivity |
| True RMS | Yes |
| Low-pass filter (LPF) | Yes |
| MAX/MIN | Yes |
| V-LoZ | Yes |
| Power supply | 2 AA batteries, included |
| Weight | Approximately 380 g |
| Dimensions | 240 × 85 × 40 mm |
| Jaw size | 44 mm |
| Safety standards and categories | EN61010-1, -2-030; EN61010-2-033; EN61326-1; CAT III 1 000 V; CAT IV 600 V |
| Inrush current measurement | Yes |
| EAN | 5907489607711 |
|---|
Does the HT208D measure DC current?
Yes. Both DC and AC current measurement have 60 A, 600 A and 1 000 A ranges.
Which batteries does it need, and are they included?
The meter uses 2 AA batteries, which are included in the box.
Gudri pirkumi vienuviet
