DEPOW deM2D22B7_DL portable EV charger, 22 kW, Type 2, 7 m
In your cart: 0
Delivery options to:
Choose countryThe DEPOW deM2D22B7_DL is a portable EV charger rated at up to 22 kW, with a 7 m cable and a Type 2 plug for the vehicle. It supports single-phase and three-phase Mode 2 charging.
Set the charging current and schedule
Choose from seven current settings between 6 and 32 A to limit the draw when your electrical installation cannot support full-power charging.
- App control: connect via Wi-Fi or Bluetooth to start or stop charging, monitor it in real time, review charging history and schedule sessions.
- Access control: the app’s “RFID Toggle” provides digital authorisation or session locking. This model does not have a physical RFID card reader.
- Status at a glance: the LCD shows charging parameters, while LEDs indicate power, standby, charging or an error.
Indoor and outdoor use
The control box is rated IP66 and the Type 2 plug is rated IP55. The charger operates from −25 to +50 °C. It monitors the control box temperature and has built-in Type A residual-current protection (30 mA AC + 6 mA DC).
| Manufacturer | DEPOW |
|---|---|
| Model | deM2D22B7_DL |
| Maximum power | 22 kW |
| Charging type | Single-phase and three-phase, Mode 2 |
| Voltage and frequency | 400 V AC, 50 Hz |
| Connector | Type 2 |
| Cable length | 7 m |
| Current settings | 6 A, 10 A, 13 A, 16 A, 20 A, 24 A, 32 A |
| Display | LCD |
| Wireless connectivity | Wi-Fi, Bluetooth |
| App features | Remote start and stop, real-time monitoring, current adjustment, charging schedule and history, digital authorisation or locking via “RFID Toggle” |
| Residual-current protection (RCD) | Type A, 30 mA AC + 6 mA DC |
| Protection features | Overload, overvoltage, undervoltage, earth fault and short-circuit protection; earth check and temperature monitoring |
| Control box protection rating | IP66 |
| Type 2 plug protection rating | IP55 |
| Operating temperature | −25 to +50 °C |
| Storage temperature | −40 to +80 °C |
| Operating relative humidity | 5–95% RH, non-condensing |
| Total harmonic distortion (THD) | ≤5% |
| LED indicators | Power, standby, charging, error |
| EAN | 6975828005169 |
|---|
Can I limit the current if my installation cannot support full-power charging?
Yes. You can select 6, 10, 13, 16, 20, 24 or 32 A to limit the charging current to suit your electrical installation.
Does “RFID Toggle” require an RFID card?
No. On this model it provides digital authorisation or session locking in the app, rather than reading a physical card.
























Gudri pirkumi vienuviet