0
Sunlu

SUNLU High-Speed Matte PETG filament, 1.75 mm, 1 kg, red

12.80 € incl. VAT
In supplier warehouse · 100 pcs. Delivery Time: 4–10 business days

In your cart: 0

Delivery options to:

Choose country

SUNLU High-Speed Matte PETG is a red 3D printing filament for prototypes, functional parts and decorative models. Its low-gloss finish reduces reflections. Each spool holds 1 kg of filament, approximately 330 m.

Print settings and material properties

  • Print speed. The recommended nozzle temperature depends on the speed you choose within the 50–600 mm/s range. The higher melt flow helps keep extrusion even and reduces the risk of nozzle clogging.
  • Print bed. The recommended bed temperature is 60–70 °C. No adhesive is needed at 70–80 °C, but you must apply adhesive if you use an unheated bed.
  • Printed parts. The material offers good layer adhesion and flexibility, with resistance to impact, wear and various chemicals.

Drying and storage

Dry the filament thoroughly before printing and protect it from moisture during long print runs. Moisture can cause stringing and oozing. Keep relative humidity below 20% during storage and printing, and store the spool in an airtight container with a desiccant.


ManufacturerSUNLU
Product nameHigh-Speed Matte PETG
ColourRed
MaterialPETG
Filament diameter1.75 ± 0.02 mm
Print speed50–600 mm/s
Nozzle temperature at 50–100 mm/s205–215 °C
Nozzle temperature at 100–300 mm/s240–250 °C
Nozzle temperature at 300–600 mm/s260–270 °C
Print bed temperature60–70 °C
Print bed temperature without adhesive70–80 °C
Recommended relative humidityBelow 20%
Filament weight per spool1 kg
Filament lengthApproximately 330 m
Tensile strength48 MPa
Flexural strength78 MPa
Elongation at break33%
Drying temperature50 °C
Drying in a SUNLU S4 or E2 dryer65 °C for at least 8 hours
EAN6933582315313
Can I print with this filament on an unheated bed?

Yes, provided you apply adhesive to the print surface.

Reviews

No reviews for this item yetOnly customers can leave a review, after buying the item.