eSUN PLA-Silk Rainbow filament 1.75 mm, 1 kg, rainbow c
In your cart: 0
Delivery options to:
Choose countryeSUN PLA-Silk Rainbow is a PLA filament for FDM printing multicoloured models with a smooth surface and a silky, metallic sheen. This 1 kg rainbow c variant suits figurines, sculptures, decorations, accessories, enclosures and cosplay props.
Gradual colour transitions
Colours change approximately every 15–20 m of filament, producing multicoloured effects from one spool without manually changing the filament. The material uses high-purity raw materials without waste or recycled materials.
- Consistent feeding: a diameter tolerance of ±0.03 mm supports even feeding and reduces the risk of nozzle clogging.
- Shape retention: low shrinkage of 0.3–0.5% reduces the likelihood of warping and cracking, while good interlayer adhesion supports model integrity.
- Finishing: minimal stringing and easy support removal simplify post-processing.
Print settings and compatibility
Recommended settings are a nozzle temperature of 210–230 °C, bed temperature of 45–60 °C, print speed of 40–300 mm/s and 100% fan cooling. The filament is compatible with most FDM printers, including models from Bambu Lab, Creality, Anycubic, Elegoo and Raise3D.
The filament is supplied on a non-detachable spool. Before using an automatic filament feeding system, check that the spool dimensions are compatible with the device.
| Manufacturer | eSUN |
|---|---|
| Model | PLA-SKRB175RB-C1P1 |
| Type | PLA-Silk Rainbow |
| Material | PLA |
| Colour | rainbow c |
| Finish | Silky, metallic sheen |
| Filament diameter | 1.75 mm |
| Diameter tolerance | ±0.03 mm |
| Net filament weight | 1 kg |
| Colour change | Approximately every 15–20 m |
| Material shrinkage | 0.3–0.5% |
| Density | 1.21 g/cm³ |
| Melt flow index (MFI) | 4.5 g/10 min (190 °C / 2.16 kg) |
| Heat deflection temperature (HDT) | 56 °C (0.45 MPa) |
| Flexural strength (XY) | 75.3 MPa |
| Flexural modulus (XY) | 2 023 MPa |
| Nozzle temperature | 210–230 °C |
| Bed temperature | 45–60 °C |
| Print speed | 40–300 mm/s |
| Recommended fan speed | 100% |
| Printing technology | FDM |
| Spool construction | Non-detachable |
| EAN | 6922572218482 |
|---|
Do I need to change filament manually to change colours?
No. Colours change gradually approximately every 15–20 m of filament, allowing multicoloured objects to be printed from one spool.
Does the spool fit automatic filament feeding systems?
The spool is non-detachable. Check its dimensions against your feeding system before use; universal compatibility is not specified.












Gudri pirkumi vienuviet