eSUN PLA-Silk Rainbow filament 1.75 mm, 1 kg, rainbow B
In your cart: 0
Delivery options to:
Choose countryeSUN PLA-Silk Rainbow is a PLA filament for FDM 3D printers, producing multicoloured prints with a smooth surface and a silky metallic sheen. This rainbow B variant changes colour gradually approximately every 15–20 m, creating transitions without manually swapping filament.
Decorative finish and consistent feeding
Use it for figurines, sculptures, decorations, toys, accessories, enclosures and cosplay props. It is made from high-purity raw materials without waste or recycled materials.
- Filament feed: a diameter tolerance of ±0.03 mm helps reduce nozzle clogging, while careful winding minimises tangling.
- Shape retention: low shrinkage of 0.3–0.5% reduces the likelihood of warping and cracking; good interlayer adhesion supports the model's structural integrity.
- Finishing: minimal stringing and easy support removal simplify post-processing.
Print settings and compatibility
Recommended settings are a nozzle temperature of 210–230 °C, bed temperature of 45–60 °C, print speed of 40–300 mm/s and 100% fan cooling. The filament is compatible with most FDM printers, including models from Bambu Lab, Creality, Anycubic, Elegoo and Raise3D.
The 1 kg filament supply comes on a non-detachable spool. Before using it in an automatic filament feeding system, check that the spool dimensions are compatible with the device.
| Manufacturer | eSUN |
|---|---|
| Model | PLA-SKRB175RB-B1P1 |
| Type | PLA-Silk Rainbow |
| Material | PLA |
| Colour | Rainbow B |
| Finish | Silky, metallic sheen |
| Filament diameter | 1.75 mm |
| Diameter tolerance | ±0.03 mm |
| Net filament weight | 1 kg |
| Colour change | Approximately every 15–20 m |
| Material shrinkage | 0.3–0.5% |
| Density | 1.21 g/cm³ |
| Melt flow index (MFI) | 4.5 g/10 min (190 °C / 2.16 kg) |
| Heat deflection temperature (HDT) | 56 °C (0.45 MPa) |
| Flexural strength (XY) | 75.3 MPa |
| Flexural modulus (XY) | 2023 MPa |
| Nozzle temperature | 210–230 °C |
| Bed temperature | 45–60 °C |
| Print speed | 40–300 mm/s |
| Recommended fan speed | 100% |
| Printing technology | FDM |
| Spool construction | Non-detachable |
| Printer compatibility | Most FDM printers, including models from Bambu Lab, Creality, Anycubic, Elegoo and Raise3D |
| EAN | 6922572218666 |
|---|
Do I need to swap filament manually to change colours?
No. The colour changes gradually approximately every 15–20 m of filament, allowing multicoloured objects to be printed from a single spool.
Can I use the spool in an automatic filament feeding system?
The spool is non-detachable. Check that its dimensions are compatible with your particular automatic feeding system before use.












Gudri pirkumi vienuviet