eSUN PLA-Silk Mystic 1.75 mm filament, gold-red-green, 1 kg
In your cart: 0
Delivery options to:
Choose countryeSUN PLA-Silk Mystic is a modified PLA filament for printing figurines, vases and ornaments. Gold, red and green are combined in a single strand, so the mix of colours you see changes as you turn the print. The silky sheen gives the surface a decorative finish without painting.
Print settings and material limits
The spool contains 1 kg of 1.75 mm filament. The recommended nozzle temperature is 190–230 °C. A heated bed is required, with a recommended bed temperature of 45–60 °C. Print speeds can reach 200 mm/s, but slower outer walls are recommended for a glossier finish.
The heat deflection temperature is 54.7 °C. This filament is best suited to decorative models and lightly loaded parts that will not be exposed to high temperatures.
| Manufacturer | eSUN |
|---|---|
| Model | PLA-SKMC175S-JRG1P1 |
| Filament type | PLA-Silk Mystic |
| Material | Modified PLA |
| Colour | Gold, red and green |
| Filament diameter | 1.75 mm |
| Filament weight | 1 kg |
| Density | 1.23 g/cm³ |
| Melt flow index (MFI) | 4.5 g/10 min (190 °C / 2.16 kg) |
| Nozzle temperature | 190–230 °C |
| Bed temperature | 45–60 °C |
| Heated bed | Required |
| Print speed | Up to 200 mm/s |
| Fan speed | 100% |
| Heat deflection temperature (HDT) | 54.7 °C |
| Tensile strength (XY / Z) | 40.13 / 12.88 MPa |
| Elongation at break (XY / Z) | 5.39 / 1.3% |
| Flexural strength (XY / Z) | 60.2 / 19.2 MPa |
| Flexural modulus (XY / Z) | 2849.66 / 2579.63 MPa |
| Izod impact strength (XY / Z) | 3.01 / 1.9 kJ/m² |
| EAN | 6922572203006 |
|---|
Can I use this filament with an unheated print bed?
This filament requires a heated bed. The recommended bed temperature is 45–60 °C.












Gudri pirkumi vienuviet