eSUN PLA-Silk 3D printing filament PLA-SK175G1P1, 1.75 mm, 1 kg, green
In your cart: 0
Delivery options to:
Choose countryThis green eSUN PLA-Silk filament gives figurines, vases and other decorative 3D prints a smooth surface with a silky sheen. The glossy finish does not need polishing.
Print behaviour
Low shrinkage and warping, along with good layer adhesion, help prints retain their intended shape. The filament has a consistent diameter, is evenly wound on the spool and flows smoothly through the nozzle. Supports are easy to remove after printing.
Recommended settings
Use with an FDM printer that takes 1.75 mm filament. The recommended nozzle temperature is 190–230 °C, with a bed temperature of 45–60 °C, a print speed of 40–100 mm/s and fan cooling at 100%.
| Manufacturer | eSUN |
|---|---|
| Model | PLA-SK175G1P1 |
| Filament type | PLA-Silk |
| Material | PLA |
| Colour | Green |
| Finish | Glossy, silky |
| Filament diameter | 1.75 mm |
| Weight | 1 kg |
| Printing technology | FDM |
| Nozzle temperature | 190–230 °C |
| Heated bed temperature | 45–60 °C |
| Recommended print speed | 40–100 mm/s |
| Cooling | 100% |
| Density | 1.21 g/cm³ |
| Melt flow index (MFI) | 4.8 g/10 min (190 °C / 2.16 kg) |
| Tensile strength | 52 MPa |
| Elongation at break | 14.4% |
| Flexural strength | 65 MPa |
| Flexural modulus | 1447 MPa |
| Notched Izod impact strength | 5.86 kJ/m² |
| Heat deflection temperature | 50 °C |
| EAN | 6922572204164 |
|---|
Is this filament suitable for prints exposed to heat?
It is best suited to models that will not be exposed to high temperatures. Its heat deflection temperature is 50 °C.












Gudri pirkumi vienuviet