eSUN PLA-Metal 3D printing filament, 1.75 mm, 1 kg, silver
In your cart: 0
Delivery options to:
Choose countrySilver eSUN PLA-Metal gives decorative pieces, figurines, props and historical models a metallic look without painting or polishing. This PLA filament contains no metal powder. It produces a slightly matte satin finish with a metallic sheen and a fine grain that makes layer lines less visible.
Printer fit and settings
The spool holds 1 kg of filament for FDM printers that take 1.75 mm filament, including suitably configured Creality, Prusa, Raise3D and Voron models.
- Print settings: use a nozzle temperature of 190–230 °C, a bed temperature of 45–60 °C and a print speed of 40–100 mm/s.
- Printing and finishing: consistent diameter and low shrinkage help reduce warping, cracking and stringing. Layers bond well, supports are easy to remove and even winding helps prevent tangles.
- Packaging: the filament is vacuum-sealed with a desiccant to protect it from moisture until opened.
The heat deflection temperature is 53 °C. Do not use finished prints in hot locations, such as inside a car left in the sun.
| Manufacturer | eSUN |
|---|---|
| Model | PLA-Metal |
| Material | PLA with no added metal powder |
| Colour | Silver |
| Filament diameter | 1.75 mm |
| Net filament weight | 1 kg |
| Finish | Satin, slightly matte, with a metallic sheen |
| Printing technology | FDM |
| Nozzle temperature | 190–230 °C |
| Bed temperature | 45–60 °C |
| Recommended print speed | 40–100 mm/s |
| Recommended fan speed | 100% |
| Density | 1.225 g/cm³ |
| Tensile strength | 63 MPa |
| Elongation at break | 11.6% |
| Flexural strength | 92 MPa |
| Flexural modulus | 3274 MPa |
| Izod impact strength | 5 kJ/m² |
| Heat deflection temperature (HDT) | 53 °C |
| Packaging | Vacuum-sealed with a desiccant |
| EAN | 6922572202788 |
|---|
Is the printer brand enough to determine compatibility?
No. Check that your specific FDM printer model and configuration support 1.75 mm filament.












Gudri pirkumi vienuviet