eSUN PLA-Metal 3D printing filament, 1.75 mm, 1 kg, antique brass
In your cart: 0
Delivery options to:
Choose countryeSUN PLA-Metal is an antique brass PLA filament for printing decorations, figurines, props and historical models. Its slightly matte satin finish has a metallic sheen without painting or polishing. The fine texture makes layer lines less visible, and the filament contains no metal powder.
Print settings and compatibility
A consistent diameter and low shrinkage help reduce warping, cracking and stringing. Good layer adhesion improves model strength, while easy-to-remove supports simplify finishing more complex prints.
- Printer fit: FDM printers that accept 1.75 mm filament, including suitably configured Creality, Prusa, Raise3D and Voron models.
- Recommended settings: 190–230 °C at the nozzle, 45–60 °C at the bed and a print speed of 40–100 mm/s.
- Spool and packaging: 1 kg of filament, evenly wound to reduce tangling and vacuum-sealed with a desiccant to protect it from moisture until opened.
The heat deflection temperature is 53 °C. Do not use finished prints where they may be exposed to high temperatures, such as inside a car left in the sun.
| Manufacturer | eSUN |
|---|---|
| Model | PLA-Metal |
| Material | PLA without added metal powder |
| Colour | Antique brass |
| Filament diameter | 1.75 mm |
| Net filament weight | 1 kg |
| Finish | Slightly matte satin with a metallic sheen |
| Printing technology | FDM |
| Nozzle temperature | 190–230 °C |
| Bed temperature | 45–60 °C |
| Recommended print speed | 40–100 mm/s |
| Recommended fan speed | 100% |
| Density | 1.225 g/cm³ |
| Tensile strength | 63 MPa |
| Elongation at break | 11.6% |
| Flexural strength | 92 MPa |
| Flexural modulus | 3274 MPa |
| Izod impact strength | 5 kJ/m² |
| Heat deflection temperature (HDT) | 53 °C |
| EAN | 6922572202795 |
|---|
Does this filament contain brass particles?
No. Antique brass describes the colour and appearance. The filament is PLA without added metal powder.












Gudri pirkumi vienuviet