eSUN PLA-Matte Rainbow 3D printing filament 1.75 mm, 1 kg, yellow–pink–purple
Delivery options to:
Choose countryeSUN PLA-Matte Rainbow is a 3D printing filament with yellow, pink and purple colour transitions. A single spool creates colour variations in models with a smooth matte surface and reduced visible reflections.
Finish and applications
Use it for decorations, ornamental figurines, cosplay props and prototypes. Support structures are easy to remove. Mechanical parts are also an option where their requirements match the material's properties.
Printing settings
- Temperature: nozzle 210–230 °C and build plate 65 °C; a PEI build surface and 0.4 mm nozzle are recommended.
- Speed and cooling: print below 300 mm/s with the fan set to 100%.
- Preparation: drying at 60 °C for more than 8 hours is recommended before printing.
For a better surface finish, enable Z-seam and start point alignment, disable Z-axis retraction during idle passes and optimise the print path. Reduce print speed if necessary.
Use limitations
This material is recommended primarily for indoor use because it is not resistant to UV radiation, acids or bases. Its heat deflection temperature is 50.2 °C at 0.45 MPa. Do not expose finished prints to high temperatures, such as inside a hot car or in strong sunlight.
| EAN | 6922572223417 |
|---|
Gudri pirkumi vienuviet
