eSUN PLA-Matte Rainbow 3D printing filament 1.75 mm, 1 kg, Macaron
Delivery options to:
Choose countryeSUN PLA-Matte Rainbow is a 3D printing filament with colour transitions in Macaron shades. A single spool creates colour variations in models, with a smooth matte finish that reduces the visibility of surface reflections.
Applications and limitations
Use it for decorations, decorative figurines, cosplay props and prototypes. Mechanical parts require appropriately selected requirements. Support structures are easy to remove. The material is recommended primarily for indoor use because it is not resistant to UV radiation, acids or bases. Its heat deflection temperature is 50.2 °C at 0.45 MPa. Finished prints should not be exposed to high temperatures, such as in a hot car or strong sunlight.
Printing settings
- Temperatures: 210–230 °C nozzle and 65 °C build plate.
- Equipment: a PEI build plate and 0.4 mm nozzle are recommended.
- Speed and cooling: print below 300 mm/s with the fan set to 100%.
- Preparation: drying at 60 °C for more than 8 hours is recommended before printing.
For a better surface finish, enable Z-seam alignment and start point alignment, disable Z-axis lift during travel moves and optimise the print path. Reduce print speed if necessary.
| EAN | 6922572215320 |
|---|
Gudri pirkumi vienuviet
