eSUN PLA-Matte Rainbow 3D printing filament, 1.75 mm, 1 kg, blue-green
Delivery options to:
Choose countryeSUN PLA-Matte Rainbow is a blue-green 3D printing filament that combines colour gradients with a smooth, matte finish. A single spool creates changing shades within your models, while the matte surface reduces the visibility of light reflections.
Applications and limitations
Use it for decorations, decorative figurines, cosplay props and prototypes. Suitability for mechanical parts depends on appropriately selected requirements. Support structures are easy to remove.
The material is recommended primarily for indoor use because it is not resistant to UV radiation, acids or bases. Its heat deflection temperature is 50.2 °C at 0.45 MPa. Finished prints should not be exposed to high temperatures, such as inside a hot car or in strong sunlight.
Printing settings
- Temperatures: nozzle 210–230 °C and build plate 65 °C; a PEI surface and 0.4 mm nozzle are recommended.
- Speed and cooling: print below 300 mm/s with the fan set to 100%.
- Preparation: drying at 60 °C for more than 8 hours is recommended before printing.
For better surface quality, enable Z-seam alignment and start point alignment, disable Z-axis lift during travel moves and optimise the print path. Reduce the print speed if needed.
| EAN | 6922572224841 |
|---|
Gudri pirkumi vienuviet
