eSUN PLA-Matte 3D printing filament, 1.75 mm, 1 kg, peach-pink
In your cart: 0
Delivery options to:
Choose countryeSUN PLA-Matte is a peach-pink filament for printing figurines, decorations, architectural models, enclosures and accessories. It gives prints a smooth matte finish with less visible layer lines than standard PLA.
Print behaviour and finishing
- Flexibility: compared with standard PLA, the material is more flexible and more resistant to impact and cracking.
- Finishing: supports are easy to remove, and the matte surface needs less finishing.
- Feeding: even winding and a consistent 1.75 mm diameter help the filament feed smoothly into the extruder.
- Dimensional stability: good adhesion to the build plate and between layers, together with low shrinkage and warping, helps parts retain their dimensions.
Recommended print settings
Set the nozzle within 190–230 °C, the bed within 45–60 °C and the print speed within 40–100 mm/s. The filament comes on a recyclable cardboard spool in vacuum-sealed packaging with a desiccant to protect it until opened.
| Manufacturer | eSUN |
|---|---|
| Model | PLA-Matte |
| Material | PLA |
| Colour | Peach-pink |
| Filament diameter | 1.75 mm |
| Filament weight | 1 kg |
| Finish | Matte |
| Printing technology | FDM |
| Nozzle temperature | 190–230 °C |
| Bed temperature | 45–60 °C |
| Recommended print speed | 40–100 mm/s |
| Recommended fan speed | 100% |
| Density | 1.329 g/cm³ |
| Tensile strength | 42 MPa |
| Flexural strength | 59.95 MPa |
| Flexural modulus | 2878.5 MPa |
| Izod impact strength | 6.2 kJ/m² |
| Elongation at break | 50% |
| Heat deflection temperature | 51 °C |
| Melt flow index (MFI) | 5.8 g/10 min (190 °C / 2.16 kg) |
| Spool type | Recyclable cardboard |
| EAN | 6922572201842 |
|---|
Which printers can use this filament?
It is compatible with most FDM printers that take 1.75 mm filament, including selected models from Bambu Lab, Prusa, Creality, Voron and Raise3D.












Gudri pirkumi vienuviet