Creality Hyper Rainbow PLA filament 1.75 mm, 1 kg, Wild Blossom

Price: 32.20 €

Products ID:	197380
Manufactured by:	Creality
Availablity:	Ready to Order
Delivery Time	7-15 business days
EAN:	6971636403654

Delivery options to:

Choose country

Creality Hyper Rainbow PLA filament produces multicolour 3D prints from a single spool. This Wild Blossom (Short Gradient) variant creates short, smooth colour transitions without changing filament or using multiple extruders.

The 1.75 mm diameter with a ±0.03 mm tolerance supports consistent material feeding. Good bed adhesion and low warping also help when printing larger objects.

The 1 kg spool is suitable for FDM/FFF printers using 1.75 mm PLA, including compatible Creality Ender and K1 models. Specified printing settings are 190–230 °C at the nozzle, 25–60 °C for the heated bed and a printing speed of 30–600 mm/s.

Material	Hyper PLA filament
Colour	Rainbow (Wild Blossom – Short Gradient)
Filament diameter	1.75 ± 0.03 mm
Density	1.25 g/cm³
Tensile strength (X-Y)	44.37 MPa
Modulus of elasticity (X-Y)	1 405.25 MPa
Elongation at break (X-Y)	10.73 %
Tensile strength (X-Z)	24.84 MPa
Modulus of elasticity (X-Z)	988.25 MPa
Elongation at break (X-Z)	2.74 %
Flexural strength (X-Y)	74.345 MPa
Flexural modulus (X-Y)	2 962.05 MPa
Flexural strength (X-Z)	46.61 MPa
Flexural modulus (X-Z)	2 059.00 MPa
Printing temperature	190–230 °C
Heated bed temperature	25–60 °C
Printing speed	30–600 mm/s
Fan setting	100 %
Printing platform	Carbon crystalline silicon, PEI platform board
Net weight	1 kg
Compatibility	FDM/FFF printers supporting 1.75 mm PLA and nozzle temperatures of approximately 190–230 °C; Creality Ender series (e.g. Ender-3), K1 series and similar high-speed printers

Do multicolour prints require filament changes?

No. The Wild Blossom (Short Gradient) colour transitions are built into the filament, allowing multicolour models from one spool without material changes or multiple extruders.

Which printers can use this filament?

It is suitable for FDM/FFF printers that use 1.75 mm PLA and support nozzle temperatures of approximately 190–230 °C. Listed compatibility includes the Creality Ender series, including Ender-3 models, and the K1 series.