Anycubic Water Washable Resin 2.0 3D printing resin, grey, 1000 g
In your cart: 0
Delivery options to:
Choose countryAnycubic Water Washable Resin 2.0 is a grey resin for LCD and DLP 3D printers using 365–405 nm light. Residual resin can be washed from printed models with water without isopropyl alcohol.
Detailed models and curing properties
Precision up to 0.15 mm supports fine structures in miniatures and complex models. Low shrinkage helps retain shape during curing, while improved toughness reduces the tendency to crack or break. The resin has a low odour during processing.
- Quantity: 1000 g.
- Exposure: 25–40 s for the first layer and 2–2.5 s per layer.
- Printing temperature: recommended range of 20–50 °C.
- Elongation at break: approximately 16–22%.
Hazards and precautions
Danger! Causes skin irritation (H315). May cause an allergic skin reaction (H317). Causes serious eye damage (H318). Harmful to aquatic life with long lasting effects (H412).
Keep out of reach of children. Wear protective gloves, protective clothing, eye protection and face protection. Wash hands, forearms and face thoroughly after handling. Avoid release to the environment; dispose of contents and container at an approved waste disposal plant. This also applies to wash water containing resin residues.
If on skin: wash with plenty of soap and water. If in eyes: rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do, and continue rinsing. Immediately call a doctor or poison centre. If medical advice is needed, have the product container or label at hand.
| Contents | 1000 g |
|---|---|
| Shore hardness | D82–D85 |
| First-layer exposure time | 25–40 s |
| Exposure time per layer | 2–2.5 s |
| Recommended printing temperature | 20–50 °C |
| Wavelength | 365–405 nm |
| Compatible light sources | LCD / DLP |
| Colour | Grey |
| Type | 3D printer resin |
| Post-print washing | Water, without isopropyl alcohol |
| Precision | Up to 0.15 mm |
| Shrinkage | Low |
| Toughness | Improved |
| Elongation at break | Approximately 16–22% |
| Processing odour | Low |
| EAN | 6974662351562 |
|---|
Which printers is this resin compatible with?
It is intended for LCD and DLP 3D printers using 365–405 nm light.
Is isopropyl alcohol needed to wash the model?
No. Residual resin can be washed off with water after printing. Prevent resin and contaminated wash water from entering the environment.












Gudri pirkumi vienuviet