Anycubic PETG filament 1.75 mm, red, on spool
In your cart: 0
Delivery options to:
Choose countryAnycubic PETG is a red 1.75 mm 3D printing filament supplied on a reusable spool. Its toughness and stability under stress suit technical parts, while water and weather resistance support outdoor projects.
Material properties and feeding
- Impact resistance: the material helps printed models retain their shape after drops.
- Environmental resistance: PETG resists water, weather and chemicals.
- Identification chip: makes automatic recording of important print data easier when working with ACE Pro.
- Reusable spool: supports stable filament feeding without tangling.
Print settings and preparation
Use a nozzle size of 0.2 mm or larger. Printing temperature is 230–250 °C, heated bed temperature is 60–70 °C and the recommended printing speed is 50–250 mm/s.
Drying is required before use: 55–65 °C for 6–8 hours.
| Version | Spool |
|---|---|
| Material | PETG (plastic) |
| Compatibility | ACE |
| Colour | Red |
| Filament diameter | 1.75 mm |
| Nozzle size | 0.2 mm or larger |
| Printing temperature | 230–250 °C |
| Heated bed temperature | 60–70 °C |
| Recommended printing speed | 50–250 mm/s |
| Preparation | Drying required |
| Drying conditions | 55–65 °C, 6–8 hours |
| Type | 3D printer filament |
| Material properties | Impact resistant, stable under stress, water, weather and chemical resistant |
| Identification chip | Facilitates automatic recording of print data when working with ACE Pro |
| Spool | Reusable; supports stable feeding without tangling |
| EAN | 6974662352781 |
|---|
Does the filament need drying before printing?
Yes. Dry it at 55–65 °C for 6–8 hours before use.
Can this PETG be used for outdoor projects?
Yes. The material is water and weather resistant and is suitable for outdoor projects.












Gudri pirkumi vienuviet