FNIRSI DPOS350P 4-in-1 digital oscilloscope, 350 MHz, 7"

-4%

FNIRSI DPOS350P 4-in-1 digital oscilloscope, 350 MHz, 7" — Image 2

FNIRSI DPOS350P 4-in-1 digital oscilloscope, 350 MHz, 7" — Image 3

FNIRSI DPOS350P 4-in-1 digital oscilloscope, 350 MHz, 7" — Image 4

FNIRSI DPOS350P 4-in-1 digital oscilloscope, 350 MHz, 7" — Image 5

264.60 €254.30 €

Products ID: 149238

In supplier warehouse Available to order: 10+ pcs. Delivery Time 5–12 business days

Delivery options to:

Choose country

The FNIRSI DPOS350P combines a 2-channel oscilloscope, signal generator, spectrum analyser and frequency response analyser. Its 7-inch IPS touchscreen provides signal viewing and direct control of measurement parameters.

Signal measurement and analysis

Oscilloscope: 350 MHz bandwidth, up to 1 GSa/s sampling and 60 kpts memory. Digital fluorescence and adjustable waveform brightness aid signal visualisation.
Signal generator: sine waves up to 50 MHz, 14 standard waveforms and captured waveform playback.
Spectrum analysis: 200 kHz–350 MHz coverage, FFT and a 3D waterfall view for examining harmonics and RF signals.
Frequency response: Bode plots from 100 Hz to 50 MHz for testing amplifiers, filters and power control loops.

Controls and supplied accessories

Cursor measurements, automatic adjustment, X-Y mode, screenshots and waveform storage support measurement workflows. The black tablet-style housing has blue accents and passive air cooling.

The 8000 mAh battery provides approximately 3 hours of operation, with charging taking approximately 5 hours. Supplied accessories include 2 × 350 MHz probes, a QC18W charger, USB cable, alligator clip leads and a user manual.

Interface languages	Chinese, English, Russian, Portuguese
Screen diagonal	7 inches
Screen resolution	1024 × 600 pixels
Screen technology	IPS, full viewing angle
Interaction mode	Capacitive touchscreen
Automatic power-off	15 minutes–1 hour / off
Charging requirements	QC18W – 12 V / 1.5 A
Battery	3.7 V lithium, 8000 mAh
Operating time	Approximately 3 hours
Charging time	Approximately 5 hours
Total power consumption	10 W
Cooling	Passive air cooling
Device dimensions	190 × 128 × 37 mm
FRA excitation signal frequency	100 Hz–50 MHz
FRA excitation signal amplitude	0–5 Vpp
FRA excitation signal offset	−2.5 V–+2.5 V
FRA number of frequency points	20–500
FRA cursor measurements	Frequency, gain, phase
Spectrum analyser FFT length	4K–32K
Spectrum analyser frequency range	200 kHz–350 MHz
Spectrum analyser level range	−60 dBmV–+260 dBmV
3D waterfall graph	Supported
Oscilloscope channels	2
Oscilloscope bandwidth	350 MHz
Rise time	1 ns
Maximum sampling rate	1 GSa/s
Memory depth	60 kpts
Input impedance	1 MΩ / 14 pF
Time base range	5 ns–50 s
Roll-mode time base	50 ms–50 s
Vertical sensitivity	2 mV–20 V (1×)
Vertical range	16 mV–160 V (1×)
DC accuracy	±2%
Time accuracy	±0.01%
Input coupling	DC / AC
Overvoltage protection	Up to 400 V
Probe attenuation	1× / 10× / 100×
Hardware bandwidth limit	150 MHz / 20 MHz
High-resolution mode	8–16 bit
Parameter measurements	12 types
Trigger modes	Auto / Single / Normal
Screenshot storage	90 images
Waveform storage	500 sets
X-Y mode	Supported
Generator waveform types	14 standard + captured waveform
Generator frequency	0–50 MHz (sine); other waveforms up to 10 M / 5 M / 3 M
Generator amplitude	0–5 Vpp
Generator offset	−2.5 V–+2.5 V
Generator duty cycle	0.1%–99.9%
Generator frequency resolution	1 Hz