Ajax WallSwitch power relay with energy monitoring
Delivery options to:
Choose countryAjax WallSwitch is an indoor power relay for switching connected appliances on and off through an app while tracking their energy consumption. It works only with Ajax Hub and installs inside a wall mounting box.
Remote control and energy monitoring
The app provides consumption statistics and monitoring of current, voltage and energy consumption. Commands receive a response in less than a second. Jeweller radio communication reaches up to 1 000 m in open space, with an external antenna to improve reception.
- Load capacity: up to 13 A, with resistive loads up to 3 kW at 230 V or 1.5 kW at 110 V.
- Protection: voltage, overcurrent and overheating protection.
- Settings retention: settings are remembered after a power failure.
Power and installation
The relay requires a 110–230 V AC supply at 50/60 Hz. Its body measures 38 × 25 × 18 mm, and installation requires a mounting box with a diameter greater than 50 mm and a depth of 55 mm. It is intended for indoor operation at ambient temperatures from 0 to +64 °C.
| Use | Indoor |
|---|---|
| Compatibility | Works only with Ajax Hub |
| Actuator | Relay |
| Relay service life | 200 000 switchings |
| Power supply voltage | 110–230 V AC ±10%, 50/60 Hz |
| Voltage protection for a 230 V network | Max. 264 V, min. 161 V |
| Voltage protection for a 110 V network | Max. 126 V, min. 77 V |
| Maximum load current | 13 A |
| Maximum current protection | Yes (13 A) |
| Allowed power at 230 V | Up to 3 kW (resistive load) |
| Allowed power at 110 V | Up to 1.5 kW (resistive load) |
| Electricity meter function | Yes, statistics available |
| Power consumption parameter monitoring | Yes: current, voltage, energy consumption |
| Allowed operating ambient temperature | 0 °C (+32 °F) to +64 °C (+147.2 °F) |
| Maximum temperature protection | Yes, 65 °C (+149 °F) inside the wall mounting box |
| Communication protocol | Jeweller (868.0–868.6 MHz) |
| Radio signal power | 25 mW |
| Command response time | Less than a second |
| Maximum distance to the central unit | Up to 1 000 m (3 300 ft) in open space |
| Standby consumption | Less than 1 Wh |
| Ingress protection | IP20 |
| Operating humidity | Less than 75% |
| Dimensions | 38 × 25 × 18 mm (1.49 × 0.98 × 0.70 in) |
| Mounting box dimensions | Diameter > 50 mm, depth 55 mm (2.17 in) |
| Antenna | External antenna for improved reception |
| Settings retention | Remembers settings after a power failure |
| Controller response check interval | 12–300 seconds |
| EAN | 4823114015434 |
|---|
Can this relay work without Ajax Hub?
No. WallSwitch works only with Ajax Hub. Connected appliances can be switched on and off through the app.
What is included?
A remote controller, user manual and installation set are included.
Gudri pirkumi vienuviet
