Ajax MultiTransmitter Jeweller wired alarm module, black
In your cart: 0
Delivery options to:
Choose countryAjax MultiTransmitter Jeweller connects wired alarm devices to an Ajax system, replacing the old security control panel. This black module communicates with the hub by radio and lets you manage connected devices in the Ajax app.
Wired devices and alarm details
It provides 18 alarm/tamper zones for devices with supported contact types. These can include IR barriers, household gas, temperature and liquid level detectors.
- Event and location: assign an alarm type and room to each wired device.
- Five alarm types: intrusion, fire, medical assistance, panic button and gas leak.
- Notifications: event details appear in push notifications and SMS and are sent to a security company's monitoring station with the appropriate code.
Setup and power
Add the module to a hub in the app by scanning its QR code. The system warns if a device is connected incorrectly. Main power is 110–255 V, 50/60 Hz, with 12 V DC backup power. The detector power outputs have a combined current limit of up to 1 A.
The set includes the MultiTransmitter board, enclosure, installation kit, power cable and user guide.
| Dimensions | 196 × 238 × 100 mm |
|---|---|
| Weight | 805 g |
| Colour | Black |
| Number of alarm/tamper zones | 18 |
| Supported detector contact types | NO, NC (without R), EOL (NC with R), EOL (NO with R) |
| Alarm signal processing mode | Pulsed or bistable |
| Main power supply | 110–255 V, 50/60 Hz |
| Backup power | 12 V DC |
| Detector power supply | 12 V DC, up to 1 A combined across all detector power outputs |
| Radio frequency band | 868.0–868.6 MHz or 868.7–869.2 MHz, depending on the sales region |
| Compatibility | All Ajax hubs and range extenders |
| Maximum radio signal power | Up to 7.29 mW (25 mW limit) |
| Radio communication range | Up to 2 000 m in line of sight |
| Operating temperature | -10 °C to +40 °C |
| Operating humidity | Up to 75% |
| EAN | 4823114015267 |
|---|
Which detector contact types are supported?
The module supports NO and NC contacts without a resistor, plus EOL circuits with NC or NO contacts and a resistor.
Does the 1 A current limit apply to each detector separately?
No. The 12 V DC detector power outputs have a combined limit of up to 1 A across all outputs.
























Gudri pirkumi vienuviet