Anycubic Kobra S1 ACE 2 Pro Combo 4-colour 3D printer
Delivery options to:
Choose countryThe Anycubic Kobra S1 ACE 2 Pro Combo is an enclosed CoreXY FDM 3D printer with a 250 × 250 × 250 mm build volume. Its included ACE 2 Pro module automatically feeds 4 filament colours and can dry filament while printing.
Materials, colour and speed
Additional ACE 2 Pro modules can expand the system to 16 colours. The printer supports PLA, PETG, ABS, ASA and TPU, but TPU must be fed directly into the printer: it is not compatible with automatic multicolour printing through ACE 2 Pro. First- and second-generation multicolour systems cannot operate together.
- Printing speed: up to 600 mm/s, with a recommended speed of 300 mm/s and maximum acceleration of 20 000 mm/s².
- Heating: nozzle up to 320°C and bed up to 120°C. The enclosed chamber helps maintain stable conditions for ABS and ASA.
- Filament drying: up to 65°C, with temperature and humidity sensors and active moisture removal.
- Automatic adjustments: LeviQ 3.0 bed levelling, accelerometer-based resonance compensation and material flow correction.
Control and print monitoring
Use the 4.3-inch touchscreen at the printer or the Anycubic App to start prints remotely, check progress and view time-lapse recordings. Wi-Fi also enables local-network management. AI monitoring detects uncontrolled filament buildup, known as spaghetti; foreign object detection, drive belt tension monitoring and automatic power-loss recovery are also supported.
Allow approximately 420 × 530 × 710 mm of workspace for the assembled kit. Noise is approximately 44 dB in Quiet mode, 46 dB in Standard mode and up to 55 dB during drying.
Included in the kit
Kobra S1 printer, ACE 2 Pro module, spool holder, signal cable, 4 filament guide tubes, 2 power cables, 2 M2.5 × 25 screws, 2 M3 × 6 screws, 1.5 / 2.0 / 2.5 mm Allen keys, filament sample, activated carbon filter, nozzle clog prevention module, nozzle cleaning module, silicone nozzle cover, nozzle cleaner, 2 cable organisers and lubricant.
| Manufacturer | Anycubic |
|---|---|
| Model | Kobra S1 |
| Module | ACE 2 Pro |
| Printing technology | FDM |
| Design | Enclosed CoreXY |
| Build volume | 250 × 250 × 250 mm |
| Maximum print speed | 600 mm/s |
| Recommended print speed | 300 mm/s |
| Maximum acceleration | 20 000 mm/s² |
| Nozzle temperature | Up to 320°C |
| Bed temperature | Up to 120°C |
| Nozzle diameter | 0.4 mm |
| Supported nozzles | 0.2 / 0.4 / 0.6 / 0.8 mm |
| Layer thickness | 0.08–0.28 mm |
| Automatic levelling | LeviQ 3.0 |
| Supported filaments | PLA, PETG, ABS, ASA, TPU |
| Filament drying | Yes, up to 65°C |
| Multicolour printing | 4 colours; expandable to 16 colours |
| Connectivity | 2.4 GHz Wi-Fi, USB |
| Software | Anycubic Slicer Next, Orca Slicer |
| File formats | STL, OBJ, 3MF |
| Noise level | 44 dB (Quiet), 46 dB (Standard), up to 55 dB during drying |
| Printer dimensions | 400 × 410 × 490 mm |
| Printer weight | 18 kg |
| ACE 2 Pro dimensions | 368 × 291.5 × 236.5 mm |
| ACE 2 Pro weight | 3.7 kg |
| Required workspace | 420 × 530 × 710 mm |
| Control screen | 4.3-inch touchscreen |
| Resonance compensation | With built-in accelerometer |
| Material flow correction | Yes |
| Print monitoring | AI spaghetti detection, foreign object detection, drive belt tension monitoring |
| Power-loss print recovery | Automatic |
| Remote control | Anycubic App: print start, progress monitoring and time-lapse viewing; local-network management via Wi-Fi |
| Drying control | Temperature and humidity sensors, active moisture removal; drying available during printing |
| Motors | Brushless, with a lifespan exceeding 5 000 hours |
| EAN | 6974662353887 |
|---|
Can TPU be printed through ACE 2 Pro?
No. The printer supports TPU, but this flexible filament must be fed directly into the printer. Automatic multicolour TPU printing through ACE 2 Pro is not supported.
What is needed to print in more than 4 colours?
The kit includes one ACE 2 Pro module for 4-colour printing. Additional ACE 2 Pro modules can expand the system to 16 colours. First- and second-generation multicolour systems cannot be used together.
