ANYCUBIC Kobra 4 Combo 3D printer with ACE 2 Pro, 260 × 260 × 260 mm
Delivery options to:
Choose countryThe ANYCUBIC Kobra 4 Combo is an FDM 3D printer with a 260 × 260 × 260 mm build volume and an included ACE 2 Pro module for automatic 4-colour printing. Connecting a second ACE 2 Pro expands printing to up to 8 colours.
Calibration and filament handling
LeviQ 3.0 provides 49-point automatic levelling, while Dynamic Flow Calibration coordinates filament feed with printing speed. A built-in accelerometer detects resonance frequencies for vibration compensation. Recommended print speed is 300 mm/s, with a maximum of 600 mm/s.
- Active drying: ACE 2 Pro dries filament at up to 65 °C, including during printing, with temperature and humidity sensors monitoring conditions inside the module.
- Material management: the system estimates remaining filament, allows automatic switching to the next spool when filament runs out and supports Anycubic smart filament recognition.
- Print monitoring: a 720p camera with AI analysis detects foreign objects and spaghetti failures, sends notifications and records time-lapse videos.
Nozzles and control
The factory-fitted 0.4 mm hardened-steel nozzle has a quick-replacement design. Optional 0.25, 0.6 and 0.8 mm nozzles are also supported. Compatible filaments are PLA, PETG and TPU (95A). Maximum nozzle temperature is 300 °C and maximum bed temperature is 100 °C.
Anycubic APP and Anycubic Slicer Next support remote control and progress monitoring. Cloud and local network modes, dual-band Wi-Fi and LAN are available. Assembly takes approximately 15 minutes; filament samples and a user manual are included.
| Manufacturer | ANYCUBIC |
|---|---|
| Model | Kobra 4 Combo |
| Printing technology | FDM |
| Multicolour printing | 4 colours as standard, expandable to 8 colours |
| Build volume | 260 × 260 × 260 mm |
| Active filament drying | Yes, drying temperature up to 65 °C |
| Supported filaments | PLA, PETG, TPU (95A) |
| Recommended print speed | 300 mm/s |
| Maximum print speed | 600 mm/s |
| Recommended acceleration | 10 000 mm/s² |
| Maximum acceleration | 20 000 mm/s² |
| Maximum nozzle temperature | 300 °C |
| Standard nozzle diameter | 0.4 mm |
| Optional nozzle diameters | 0.25 mm / 0.6 mm / 0.8 mm |
| Nozzle material | Hardened steel |
| Maximum bed temperature | 100 °C |
| Work surface | PEI plate with spring steel |
| Operating system | Kobra OS |
| Levelling | LeviQ 3.0 automatic levelling, Z-offset |
| Flow calibration | Yes |
| Resume after power loss | Yes |
| Filament detection and automatic resume | Yes |
| Filament tangling detection | Yes |
| AI spaghetti detection | Yes |
| Skip faulty objects | Yes |
| Control methods | USB / Anycubic Slicer / Anycubic APP |
| Display | 3.5-inch capacitive touchscreen |
| Camera | HD 720p |
| Noise level in standard mode | ≤48 dB |
| Noise level in quiet mode | ≤45 dB |
| Supported languages | EN / CN / DE / FR / IT / ES / RU / JP |
| Connectivity | Wi-Fi 2.4 GHz / 5 GHz, LAN |
| Automatic levelling points | 49 |
| Levelling repeatability | Less than 0.02 mm |
| Filament feed motors | 4 independent brushless motors |
| Feed motor service life | At least 5 000 operating hours |
| Assembly time | Approximately 15 minutes |
| EAN | 6974662354600 |
|---|
What is needed for 8-colour printing?
One ACE 2 Pro module is included for 4-colour printing. Printing in up to 8 colours requires a second ACE 2 Pro module.
What is included?
Kobra 4 printer, ACE 2 Pro module, filament spool holder, 4 M3×6 screws, 4 Teflon tubes, signal cable, 2 power cables, 4.0/2.5/2.0/1.5 mm wrenches and 1 magnet set, filament samples, nozzle cleaner, cable clip, application brush, 2 decorative covers, lubricant, PTFE tube and user manual.












Gudri pirkumi vienuviet