ANYCUBIC Water-Wash Resin 2.0 3D Printer Photopolymer Resin, 1 kg, Gray
SOLDOUT!
ANYCUBIC Water-Wash Resin 2.0 is a photopolymer resin designed for LCD and DLP 3D printers, allowing residue removal using water alone without isopropyl alcohol.
Key Features
- Water-based cleaning or cleaning with 95% IPA
- Low volumetric shrinkage rate of 2.2% to 5.5% with 0.15 mm precision
- High crack resistance with an elongation at break of 16% to 22%
- Reduced odor and anti-yellowing formula
- Compatible with LCD and DLP 3D printers using 405 nm UV curing technology
| Manufacturer | ANYCUBIC |
|---|---|
| Model | Water-Wash Resin 2.0 |
| Color | Gray |
| Material | Light-curable resin modified with hydrophilic groups |
| Wavelength | 365–405 nm |
| Viscosity | 190–230 mPa·s (25°C) |
| Density | 1.07–1.09 g/cm³ |
| Hardness | 82–85 HD |
| Tensile strength | 38–43 MPa |
| Elongation at break | 16–22% |
| Flexural modulus | 48–60 MPa |
| Flexural strength | 2300–3000 MPa |
| Young’s modulus | 1100–1300 MPa |
| Izod impact strength | 133 J/m |
| Volumetric shrinkage | 2.2–5.5% |
| Printing temperature | 20–50°C |
| Recommended ambient temperature during printing | 20–40°C |
| Exposure time for the first layer | 25–40 s |
| Exposure time for a standard layer | 2–2.5 s |
| Cleaning agent | 95% IPA / Water |
| Cleaning time | 95% IPA: ≥3 min; Water: medium, ≥5 min |
| UV wavelength during curing | 405 nm |
| Curing temperature | 18–30°C |
| UV irradiance | 25 000–30 000 µW/cm² |
| Curing time | 3 min |
| Weight | 1 kg |
| EAN | 6974662351593 |
|---|
Can models be cleaned with water?
Yes, the hydrophilic formula allows resin residue to be washed off with water alone (≥5 min) or with 95% IPA (≥3 min).
What 3D printers are compatible with this resin?
It is compatible with LCD and DLP 3D printers operating within 365–405 nm wavelength and using 405 nm UV curing technology.
Reviews
No reviews for this item yetOnly customers can leave a review, after buying the item.
Gudri pirkumi vienuviet
