Anycubic IPHTFBK-101 PETG-CF filament, 1 kg, black
Delivery options to:
Choose countryAnycubic IPHTFBK-101 is a black, carbon fibre-reinforced PETG-CF filament for 3D printing. This 1 kg variant offers greater stiffness and impact resistance than standard PETG, with a satin-matte finish that helps conceal layer lines.
Material for functional parts
Low shrinkage and resistance to deformation help maintain dimensional stability. Resistance to water and weather also supports outdoor applications.
Printing settings and spool design
- Nozzle: a diameter of at least 0.4 mm is recommended, with a hardened steel nozzle advised.
- Temperatures: use a nozzle temperature of 240–270 °C and a bed temperature of 65–75 °C.
- Speed: recommended print speed is 40–250 mm/s, with a maximum volumetric flow rate of 11 mm³/s.
- ACE Pro: the built-in chip enables automatic filament identification in the system.
The reusable spool has a threaded design to improve stability and reduce tangling. It withstands temperatures up to 100 °C and accepts most spool-free filament refills. This temperature rating applies to the spool, not to printed parts.
| Manufacturer | Anycubic |
|---|---|
| Model | IPHTFBK-101 |
| Colour | Black |
| Weight | 1 kg |
| Compatibility with ACE Pro Multicolor Filament Box | Yes |
| Recommended nozzle diameter | ≥ 0.4 mm |
| Nozzle temperature | 240–270 °C |
| Bed temperature | 65–75 °C |
| Recommended print speed | 40–250 mm/s |
| Cooling time | 6 s |
| Maximum volumetric flow rate | 11 mm³/s |
| Density | 1.32 g/cm³ |
| Material mass flow rate | 14.1 ± 1.6 g/10 min (190 °C / 2.16 kg) |
| Melting temperature | 221 °C |
| Vicat softening temperature | 74 °C |
| Heat deflection temperature (0.45 MPa) | 67 °C |
| Water absorption | 0.38% |
| Material stiffness (Young’s modulus) | 2550 ± 100 MPa |
| Tensile strength | 54 ± 2 MPa |
| Elongation at break | 12 ± 1% |
| Flexural strength | 88 ± 2 MPa |
| Izod impact strength (X-Y) | 60 ± 4 kJ/m² |
| Tensile strength (Z) | 37 ± 3 MPa |
| Material | Carbon fibre-reinforced PETG-CF |
| Recommended nozzle material | Hardened steel |
| Automatic filament identification | Built-in chip for the Anycubic ACE Pro system |
| Spool design | Reusable, with a threaded connection |
| Spool heat resistance | Up to 100 °C |
| Spool refill compatibility | Most spool-free filament refills |
| EAN | 6974662354594 |
|---|
What nozzle is recommended for this filament?
A hardened steel nozzle with a diameter of at least 0.4 mm is recommended. The specified nozzle temperature is 240–270 °C, with a bed temperature of 65–75 °C.
Does ACE Pro automatically identify this filament?
Yes. The filament is compatible with the ACE Pro Multicolor Filament Box, and its built-in chip enables automatic identification.












Gudri pirkumi vienuviet