Bigstren electric vacuum suction lifter with LCD, 200 mm
Bestseller
The Bigstren electric vacuum suction lifter is designed for moving tiles, porcelain tiles, glass and rigid panels. Its pump automatically creates and replenishes the vacuum, eliminating the need for manual pumping.
Grip and operating status
- 200 mm rubber suction cup: for smooth, clean, dry and non-porous surfaces.
- Load limits: the recommended item weight range is 1.5–180 kg. The maximum vertical pull-off force is 200 kg; this is not the working load limit.
- LCD and battery indicator: help you check the device status.
- Built-in 1200 mAh battery: provides up to 8 hours of intermittent operation, with charging taking approximately 1.5–3 hours.
Use conditions and safety
For use only by adults who have read the manual. Inspect the suction cup, handle and housing before use; do not use a damaged device. Seat the cup securely in the centre of the surface and do not exceed the 180 kg working load. Do not use on soft, porous, very uneven, damaged or perforated surfaces, or surfaces with loose paint, plaster, rust, oil or grease.
Keep the load as close to your body as possible and avoid sudden movements, turns and impacts. Do not move loads over people or where a falling load could cause injury or damage. Do not use for lifting people, fall protection or any other life-safety application.
Do not use in rain, very humid conditions, near open flames, at high temperatures or in explosive environments. Keep the charging port and electrical components dry; charge on a stable, dry surface away from flammable materials. Do not leave the device unattended while switched on. Do not modify the device or dismantle the pump or battery; repairs must be carried out by an authorised service centre. Do not burn, puncture or overheat the device, or short-circuit the battery terminals.
| Brand | Bigstren |
|---|---|
| Type | Electric vacuum suction lifter |
| Rubber suction cup diameter | 200 mm |
| Maximum vertical pull-off force | 200 kg |
| Recommended safe working load | Up to 180 kg |
| Recommended item weight range | 1.5–180 kg |
| Motor voltage | 3.7 V DC |
| Battery capacity | 1200 mAh |
| Charging input | 5 V / 1 A |
| Charging time | Approximately 1.5–3 hours |
| Operating time | Up to 8 hours of intermittent operation |
| Filter | Cotton |
| Product weight | 1.606 kg |
| Weight with packaging | 1.792 kg |
| Vacuum control | Automatic vacuum generation and replenishment |
| Indicators | LCD display and battery indicator |
| EAN | 5900779964686 |
|---|
What is included?
A 200 mm vacuum suction lifter, polyethylene carrying case, cotton filter installed in the device, USB-C cable, user manual and original manufacturer packaging.
Can it carry a 200 kg load?
The recommended safe working load is up to 180 kg, with a recommended item weight range of 1.5–180 kg. The 200 kg figure refers to the maximum vertical pull-off force, not the working load.
