MOES ZSS-HM-CO-A-MS carbon monoxide detector with ZigBee 3.0
In your cart: 0
Delivery options to:
Choose countryThe MOES ZSS-HM-CO-A-MS detects carbon monoxide (CO) in residential buildings. Its electrochemical sensor detects this colourless, odourless gas and triggers audible and visual warnings.
Alarm, status and testing
The alarm repeats 4 beeps and 4 red LED flashes every 5 seconds. It is rated at 85 dB at a distance of 3 m.
- Status lights: green indicates normal operation, red signals an alarm, and yellow indicates low batteries, a fault or the end of the sensor’s service life.
- Test and hush: press the button to check the audible and visual signals. Hush mode can silence an unwanted alarm for about 10 minutes or a low-battery warning for about 12 hours.
- Battery power: the 2 included AA batteries can last up to 5 years, and the sensor has a service life of up to 10 years.
Smart home setup and installation
Connect the detector to a separately sold ZigBee gateway to receive app notifications when CO is detected, when levels return to normal or when the batteries are low. Smart Linkage lets you set up automations with other smart home devices.
A qualified installer should fit the detector on a wall or ceiling in a suitable location. It detects CO only and does not replace smoke, fire or combustible gas detectors, or regular inspections of heating equipment and ventilation systems.
| Manufacturer | MOES |
|---|---|
| Model | ZSS-HM-CO-A-MS |
| Device type | Carbon monoxide (CO) detector |
| Detection technology | Electrochemical |
| Connectivity | ZigBee 3.0 |
| Gateway required for network features | ZigBee (sold separately) |
| Frequency band | 2.400–2.483 GHz |
| Maximum radio transmission power | < +10 dBm |
| Power supply | 2 × 1.5 V DC, AA LR6 alkaline batteries |
| Sensor service life | Up to 10 years |
| Battery life | Up to 5 years |
| Alarm volume | 85 dB at 3 m |
| Alarm indication | Audible and visual (LED) |
| LED indicators | Green — normal operation; red — alarm; yellow — low battery, fault or end of sensor life |
| Features | Self-test, fault diagnostics, low-battery warning, digital temperature compensation, RF interference protection, Hush mode, Smart Linkage, in-app notifications |
| Operating temperature | −10 °C to +40 °C |
| Mounting method | Wall or ceiling |
| Dimensions | 85 × 85 × 27.5 mm |
| Standard compliance | EN 50291-1:2018 |
| Intended use | Residential buildings |
| Relative humidity | 0–95%, non-condensing |
| Alarm activation time | 50 ppm — within 90 min; 100 ppm — within 40 min; 300 ppm — within 3 min |
| Start-up time | Approximately 100 s |
| Standby indication | Green LED flashes every 30 s |
| EAN | 6974246475936 |
|---|
What comes in the box?
1 detector, 1 mounting bracket, 2 AA batteries, 2 screws, 2 wall plugs and a user manual. The ZigBee gateway is not included.












Gudri pirkumi vienuviet