MOES S03-CO-EU-MS carbon monoxide detector with temperature and humidity
In your cart: 0
Delivery options to:
Choose countryThe MOES S03-CO-EU-MS continuously monitors carbon monoxide (CO) and shows air temperature and relative humidity on its colour display. It plugs directly into a power socket for use at home or in a motorhome.
Alerts and display controls
- Three alert levels. The LED ring indicates the current level in green, yellow or red. The detector has an 85 dB siren, and the red alarm is accompanied by a flashing light.
- Temporary muting. You can mute the yellow warning for the current warning cycle only. The red alarm cannot be muted.
- Live readings. The LCD shows measurements, the alert level, battery status and sound indicators. Set the backlight to full, medium or off, and choose °C or °F for temperature.
Mains power and battery backup
The detector runs on 100–240 V AC. If mains power fails, the built-in rechargeable battery provides up to 12 hours of operation. While plugged in, the power button runs a self-test rather than switching the detector off. Keep the ventilation openings clear.
| Manufacturer | MOES |
|---|---|
| Model | S03-CO-EU-MS |
| Device type | Carbon monoxide, temperature and humidity sensor |
| CO sensor type | AetherSentinel, resistant to chemical poisoning |
| CO detection range | 0–999 ppm |
| Alarm volume | 85 dB |
| Alarm indication | Audible and visual alerts, LED ring and red strobe light |
| Mute function | Temporary muting at the yellow warning level |
| Red alarm muting | Not available |
| Temperature measurement range | −10 to 50 °C / 14 to 122 °F |
| Temperature units | °C / °F |
| Humidity measurement range | 0–95% RH, non-condensing |
| Display | Colour HD LCD |
| Display resolution | 240 × 296 |
| Display brightness adjustment | 3 levels: full, medium, off |
| Display information | CO concentration, hazard level, temperature, humidity, battery status, mute status and speaker status |
| Self-test | Yes |
| Power supply | Mains and built-in rechargeable battery |
| Input voltage | 100–240 V AC, 50/60 Hz |
| Battery capacity | 1000 mAh |
| Battery runtime | Up to 12 hours |
| Installation | Plugs directly into a power socket |
| Plug | Rotatable and replaceable, with a release button |
| Housing material | Flame-retardant ABS plastic |
| Operating temperature | −10 to 50 °C |
| Dimensions | 125.5 × 60.5 × 36.3 mm without plug |
| Applications | Homes, motorhomes and other recreational vehicles |
| CO measurement accuracy | ±10% |
| CO measurement resolution | 0.5 ppm |
| Temperature measurement accuracy | ±1.5 °C |
| Humidity measurement accuracy | ±5% |
| EAN | 6978507851088 |
|---|
What comes in the box?
1 detector, 1 user manual, 1 power plug and 1 packaging insert.
When can I switch the detector off with the power button?
Only when it is running on battery power. While it is plugged into the mains, the button runs a self-test.












Gudri pirkumi vienuviet