Ajax uartBridge integration module with UART interface
In your cart: 0
Delivery options to:
Choose countryAjax uartBridge integrates Ajax wireless detectors into a third-party security or smart home system through a UART interface. Designed for indoor use, the module supports up to 85 connected devices.
Wireless communication and protection
Jeweller technology provides communication between a detector and the receiver over distances of up to 2 000 m in open space. The connection uses encryption and authentication to protect against spoofing. Jamming detection and frequency hopping are also supported.
- Monitoring: polling every 12–300 seconds, with device information including alarms, battery level and current state.
- Configuration: detector settings can be adjusted over the radio channel.
- Updates: software updates are supported.
Connection and power
The module connects to the central unit via UART at 57 600 Bd. It receives its 5 V DC power supply from the UART interface.
| Communication interface with central unit | UART (57 600 Bd) |
|---|---|
| Use | Indoor |
| Radio signal power | 25 mW |
| Communication protocol | Jeweller (868.0–868.6 MHz) |
| Maximum distance between detector and uartBridge receiver | Up to 2 000 m (6 552 ft) in open space |
| Maximum number of connected devices | 85 |
| Jamming detection | Yes |
| Software updates | Yes |
| Detector performance monitoring | Yes |
| Power supply voltage | 5 V DC (from the UART interface) |
| Operating humidity | Up to 90% |
| Dimensions | 64 × 55 × 13 mm (2.51 × 2.16 × 0.51 in) without antennas; 110 × 58 × 13 mm (4.33 × 2.28 × 0.51 in) with antennas |
| Device polling interval | 12–300 seconds |
| Connection protection | Authentication, encrypted connection and frequency hopping |
| Detector configuration | Over the radio channel |
| Device status information | Alarms, battery level and current state |
| EAN | 9990000000302 |
|---|
How does the module connect to a third-party system?
It uses a UART interface at 57 600 Bd to integrate Ajax wireless detectors into a third-party security or smart home system. The UART interface also supplies 5 V DC power.
Does the 2 000 m range apply indoors?
The maximum distance of up to 2 000 m between a detector and the receiver is specified for open space.
























Gudri pirkumi vienuviet