Thermal actuator for heating manifolds, NC, 230 V AC, M30 × 1.5
21.20 €
incl. VAT
In supplier warehouse · 1 pcs. Delivery Time: 5–10 business days
In your cart: 0
Delivery options to:
Choose countryThis thermal actuator regulates water flow through a heating manifold in response to a room thermostat or central controller. Its normally closed (NC) design keeps the valve closed when the actuator is unpowered.
Control and installation
- Thermostats. The actuator works with programmable and non-programmable room thermostats.
- Connection. It mounts to the heating manifold via an M30 × 1.5 thread, operates on 230 V AC at 50/60 Hz and consumes 2 W.
- Actuation time. Opening or closing the valve takes up to 180 seconds.
The actuator is unsuitable for heating systems that use a solid fuel boiler.
| Application | Water-based heating system |
|---|---|
| Actuator type | NC (normally closed) |
| Operating voltage | 230 V AC, 50/60 Hz |
| Starting current | 50 mA |
| Actuation time | Up to 180 s (valve opening or closing) |
| Power consumption | 2 W |
| Actuation force | 100 N (±10%) |
| Installation | Mounted on the heating manifold |
| Thread | M30 × 1.5 mm |
| Cable length | 80 cm |
| Operating temperature | −20 °C to +50 °C |
| Operating relative humidity | 5–95% (non-condensing) |
| Ingress protection rating | IP54 |
| Dimensions | 40 × 40 × 68 mm |
| Colour | White |
| Compliance | CE, EN60730 |
| EAN | 9990000260096 |
|---|
Can I use this actuator with a non-programmable room thermostat?
Yes. The actuator works with both non-programmable and programmable room thermostats.
Can I use this actuator in a system with a solid fuel boiler?
No. The actuator is unsuitable for systems heated by a solid fuel boiler.
Reviews
No reviews for this item yetOnly customers can leave a review, after buying the item.










Gudri pirkumi vienuviet