Shelly Qubino Wave 2PM 2-channel Z-Wave controller with power metering
-5%
Delivery options to:
Choose countryShelly Qubino Wave 2PM is a two-channel Z-Wave controller for independently switching two lights or other electrical devices. It measures power on each channel and lets you monitor total energy consumption.
Control and automation
The controller is compatible with certified Z-Wave gateways and more than 4,000 Z-Wave devices. Control options include a manual switch, an app, a home automation system and voice control.
- Schedules: set operation around your daily routine or sunrise and sunset.
- Scenes: combine the controller with other Z-Wave devices for coordinated automation.
- Setup and networking: SmartStart simplifies configuration, while the repeater function relays Z-Wave signals.
- Updates: supports two-step verification and wireless firmware updates.
Installation and electrical limits
The module fits standard electrical boxes. It uses a 110–240 V AC or 24 V DC ±10% supply and consumes less than 0.3 W itself. Maximum AC switching current is 10 A per channel, 16 A total and 18 A total peak. Indoor range is up to 40 m, depending on local conditions.
| Manufacturer | Shelly |
|---|---|
| Model | QubinoWave2PM |
| Power supply | 110–240 V AC / 24 V DC ±10% |
| Power consumption | < 0.3 W |
| Power measurement (W) | Yes |
| Maximum AC switching voltage | 240 V |
| Maximum AC switching current | 10 A per channel, 16 A total, 18 A total peak |
| Maximum DC switching voltage | 30 V |
| Maximum DC switching current | 10 A |
| Overheating protection | Yes |
| Overcharge protection | Yes |
| Range | Up to 40 m indoors (131 ft), depending on local conditions |
| Z-Wave™ repeater | Yes |
| Processor | Z-Wave™ S800 |
| Z-Wave™ frequency band | 868.4 MHz |
| Maximum transmitted RF power | < 25 mW |
| Dimensions (height × width × depth) | 37 × 42 × 16 ±0.5 mm / 1.46 × 1.65 × 0.63 ±0.02 inches |
| Mounting | Wall bracket |
| Screw terminal maximum tightening torque | 0.4 Nm / 3.5 lb |
| Wire cross-section | 0.5–1.5 mm² / 20–16 AWG |
| Wire stripping length | 5–6 mm / 0.20–0.24 inches |
| Housing material | Plastic |
| Colour | Black |
| Ambient temperature | -20 °C to 40 °C / -5 °F to 105 °F |
| Humidity | 30–70% relative humidity |
| Maximum altitude | 2 000 m |
| EAN | 3800235269015 |
|---|
Can the two channels be controlled independently?
Yes. The controller can independently operate two lights or other electrical devices and measure power on each channel.
Which smart home systems is it compatible with?
It is compatible with certified Z-Wave gateways and can work with other Z-Wave devices. SmartStart helps simplify configuration.
Gudri pirkumi vienuviet
