Shelly Pro 1CB C10 smart circuit breaker, 10 A, 6 kA
Delivery options to:
Choose countryThe Shelly Pro 1CB C10 is a single-pole smart circuit breaker rated at 10 A, with a C trip characteristic and a 6 kA short-circuit breaking capacity. It combines overload and short-circuit protection with electronic overvoltage and undervoltage protection.
Protection and circuit control
Voltage protection thresholds and delay times can be configured to suit the installation. A physical switch locks out electronic controls, including remote circuit switching. Remote switching must occur less than once per minute.
- Connectivity: 2.4 GHz Wi-Fi, Bluetooth 4.2 and Ethernet through an RJ45 port.
- Monitoring: AC voltage measurement with ±5% accuracy, internal temperature monitoring and an event log recording switching times and sources.
- Automation: schedules, scripts and up to 20 webhooks with a maximum of 5 URLs per webhook.
Access and installation
The Shelly Smart Control app lets you switch the circuit, change settings and receive anomaly notifications. A local web interface, MQTT, HTTP and WebSocket integration, CSV export and JSON/RPC data access are also available.
The breaker mounts on a DIN rail in a properly prepared electrical panel. It has a manual lever, reset button and connectivity status LEDs. The mechanical indicator shows red when the circuit is on and green when it is off. The operating temperature range is -5 to 40 °C.
| Device type | Smart overcurrent circuit breaker (MCB) |
|---|---|
| Number of poles | 1 |
| Rated current | 10 A |
| Trip characteristic | C |
| Short-circuit breaking capacity | 6 kA |
| Supply voltage | 230 V AC, 50 Hz |
| Minimum operating voltage | 160 V AC, 50 Hz |
| Electronics power consumption | Less than 3 W |
| Power loss | 1.13 W |
| Insulation voltage | 500 V |
| Rated impulse withstand voltage | 4 kV |
| Energy limitation class | 3 |
| Standard | IEC 60898-1 |
| Electrical endurance | Over 6 000 cycles |
| Mechanical endurance | Over 20 000 cycles |
| Maximum remote switching frequency | Less than once per minute |
| Protections | Overload, short circuit, overvoltage and undervoltage |
| Voltage measurement | Yes, accuracy ±5% |
| Temperature monitoring | Yes, internal sensor |
| Event history | Yes |
| Data export | CSV, JSON/RPC |
| Connectivity | Wi-Fi, Bluetooth, Ethernet |
| Wi-Fi standard | IEEE 802.11 b/g/n |
| Wi-Fi band | 2.4 GHz |
| Maximum Wi-Fi transmit power | Less than 20 dBm |
| Wi-Fi range | Up to 30 m indoors, up to 50 m outdoors |
| Bluetooth version | 4.2 |
| Bluetooth frequency | 2402–2480 MHz |
| Maximum Bluetooth transmit power | Less than 4 dBm |
| Bluetooth range | Up to 10 m indoors, up to 30 m outdoors |
| Ethernet port | RJ45 |
| Supported protocols | MQTT, HTTP, WebSocket |
| App | Shelly Smart Control |
| Additional features | Schedules, scripts, webhooks, virtual components, KVS, BLE gateway, Wi-Fi range extender, OTA updates, local web interface |
| Maximum number of webhooks | 20 |
| Maximum URLs per webhook | 5 |
| Mounting | DIN rail |
| Housing material | Plastic |
| Colour | Light grey (RAL 7035) |
| Dimensions | 93 × 36 × 74 mm |
| Weight | 212 g |
| Operating temperature | -5 to 40 °C |
| Relative humidity | 30–70% RH |
| Maximum operating altitude | 2 000 m above sea level |
| Environmental pollution degree | 2 |
| Maximum terminal tightening torque | 2.5 Nm |
| Maximum single-strand wire cross-section | 6 mm² |
| Maximum multi-strand wire cross-section | 25 mm² |
| Maximum flexible cable cross-section | 16 mm² |
| Cable insulation strip length | 15 mm |
| EAN | 3800238073923 |
|---|
Can remote control be locked out?
Yes. A physical switch lets you lock out the device's electronic controls, including remotely turning the circuit on and off.
Can it disconnect a circuit following a flood sensor alarm?
Yes. With appropriate configuration and connection to a compatible Shelly flood sensor, it can automatically disconnect the specified circuit when it receives an alarm signal.
Gudri pirkumi vienuviet
