LED dimmer V1-F for single-colour strips, 12–48 V DC, 8 A, Push-Dimm
In your cart: 0
Delivery options to:
Choose countryThe V1-F is a single-channel LED dimmer for single-colour LED strips, panels and similar fixtures that run on 12–48 V DC constant voltage. It adjusts brightness and fades the light in and out when switched on and off.
Fade settings and controls
- Fade duration: use the built-in rotary knob to select a transition of 1, 3, 5, 10 or 20 seconds.
- Brightness: digital PWM control provides 4096 levels across a 0–100% dimming range.
- Push-Dimm: a connected push button lets you switch the light on or off and adjust its brightness.
- Wireless control: compatible 2.4 GHz RF remotes support single-zone or multi-zone control, with a range of up to 30 m in open areas.
Wiring and protection
The output is rated at 8 A and accepts wires with a cross-section of 0.5–2 mm². The enclosure is rated IP20 and is not waterproof. The dimmer has overheating, overload and short-circuit protection with automatic recovery.
| Model | V1-F |
|---|---|
| Number of channels | 1 |
| Lighting type | Single-colour LED lighting |
| Radio frequency | 2.4 GHz (RF) |
| Input voltage | 12–48 V DC |
| Output voltage | 12–48 V DC |
| Output current | 8 A |
| Power | 96–384 W |
| PWM frequency | 2000 Hz |
| Dimming levels | 4096 |
| Dimming range | 0–100% |
| Dimming curve | Logarithmic |
| Fade duration | 1, 3, 5, 10 or 20 s |
| Operating range | Up to 30 m in open areas |
| Ingress protection rating | IP20 (not waterproof) |
| Wire cross-section | 0.5–2 mm² |
| Compliance markings | CE, EMC, RoHS |
| Operating temperature | −20 to +55 °C |
| Dimensions | 114 × 38 × 26 mm |
| Colour | White |
| Weight | 53 g |
| Push-Dimm input | Positive or negative trigger |
| RF control zones | Single-zone or multi-zone |
| Built-in protection | Overheating, overload and short-circuit protection with automatic recovery |
| EAN | 9990001084561 |
|---|
What kind of button can I use with Push-Dimm?
You can use either a momentary or a latching push button. Both types support on/off control and brightness adjustment.
Can I use the dimmer with an LED panel?
Yes, if the panel is single-colour, runs on 12–48 V DC constant voltage and does not exceed the dimmer’s 8 A output rating.
























Gudri pirkumi vienuviet