Makita HM1213C demolition hammer, SDS-MAX, 18.6 J
Delivery options to:
Choose countryThe Makita HM1213C is a corded demolition hammer for chiselling and breaking concrete, masonry and similar materials. It combines an SDS-MAX tool holder with 1 510 W power consumption and 18.6 J single impact energy.
Adjustable working settings
The impact rate adjusts from 950 to 1 900 min⁻¹ to suit the task. Constant electronics maintain steady performance under load, while soft start provides a controlled startup. The chisel can be set in 12 positions to adjust its working orientation.
Controls and operating comfort
- AVT: Anti-Vibration Technology reduces vibration during operation.
- Continuous operation: a slide switch enables sustained running.
- Service indicators: signal carbon brush replacement and possible switch or connection cable faults.
Power and contents
The hammer runs on mains power and has a 4.0 m power cord. The package includes the demolition hammer, a 280 mm chisel, chisel grease, a cloth and a transport case.
| Power consumption | 1 510 W |
|---|---|
| Maximum output power | 1 800 W |
| Impact rate | 950–1 900 min⁻¹ |
| Single impact energy | 18.6 J |
| Tool holder | SDS-MAX |
| Power cord length | 4.0 m |
| Sound pressure level (LpA) | 91 dB(A) |
| Sound power level (LWA) | 99.1 dB(A) |
| Noise uncertainty K | 2.01 dB(A) |
| Chiselling vibration with D-side handle | 9.9 m/s² |
| Vibration uncertainty K | 1.5 m/s² |
| Dimensions (length × width × height) | 57.6 × 14.9 × 26.5 cm |
| Weight | 10.8 kg |
| Type | Chipping hammer |
| Power supply | Mains |
| Application material | Concrete |
| Maximum impact rate | 1 900 min⁻¹ |
| Drill chuck diameter | 18 mm |
| Clockwise/counter-clockwise rotation | No |
| Hammer stop | No |
| Rotation stop | No |
| Depth | 57.6 cm |
| Colour | Blue / black |
| Height | 26.5 cm |
| Width | 14.9 cm |
| Weight category | > 6.1 kg |
| Power category | > 1 301 W |
| Chisel positions | 12 |
| Anti-vibration technology | AVT |
| Constant electronics under load | Yes |
| Soft start | Yes |
| Continuous operation switch | Slide switch |
| Service indicators | Carbon brush replacement; possible switch or connection cable faults |
| EAN | 0088381602181 |
|---|
Which chisels can be used with this hammer?
It accepts compatible pointed, flat and special chisels with an SDS-MAX shank.
What is included?
The package contains 1 demolition hammer, 1 chisel measuring 280 mm, chisel grease, 1 cloth and 1 transport case.
Gudri pirkumi vienuviet
