PROSCENIC Q20 Plus robot vacuum and mop with 4 L emptying station
Delivery options to:
Choose countryThe PROSCENIC Q20 Plus combines vacuuming and mopping with an included automatic dust-emptying station. Its transparent 4 L station container uses a bagless design, so there are no dust bags to buy.
Mapping and cleaning control
LiDAR navigation and TrueMapping 2.0 map rooms and plan cleaning routes. Store up to 5 maps, select individual rooms, create schedules and define no-go zones. Dual-grid cleaning covers the selected area in two directions.
- Three cleaning modes: vacuum, mop or use both functions simultaneously.
- Surface adjustment: 10 000 Pa suction with automatic adjustment and a power boost on carpets. The V-shaped brush reduces hair tangling.
- Obstacle handling: 3D obstacle detection and the ability to cross thresholds, cables and carpets up to 15 mm high.
- Control options: mobile app, included remote, voice commands and Apple Watch. Amazon Alexa, Google Assistant, Siri and IFTTT are supported.
Runtime and the emptying station
Runtime is up to 200 minutes, with a maximum cleaning area of up to 230 m². At 15% battery charge, the robot returns to its station; at 80%, it resumes cleaning where it stopped. Charging takes no more than 6 hours.
The noise level is approximately 65 dB, while Do Not Disturb mode reduces notifications. The filtration system captures up to 99.7% of fine particles and allergens collected in the dustbin.
| Manufacturer | PROSCENIC |
|---|---|
| Model | Q20 Plus |
| Suction power | 10 000 Pa |
| Navigation technology | LiDAR |
| Mapping technology | TrueMapping 2.0 |
| Maximum runtime | Up to 200 minutes |
| Charging time | ≤ 6 hours |
| Maximum cleaning area | Up to 230 m² |
| Docking station capacity | 4 L |
| Functions | Vacuuming, mopping, simultaneous vacuuming and mopping |
| Stored maps | Up to 5 |
| Maximum obstacle-clearing height | 15 mm |
| Noise level | Approximately 65 dB |
| Sensors | Laser radar ×1; line laser ×1; floor sensors ×3; mechanical collision sensors ×2; docking IR receivers ×3; wheel encoders ×2; fan/motor speed sensor ×1; gyroscope (IMU) ×1; dustbin presence sensor ×1; mop pad presence sensor ×1 |
| Connectivity | Mobile app, Wi-Fi, Bluetooth |
| Voice control and integrations | Amazon Alexa, Google Assistant, Siri, IFTTT |
| Docking station design | Automatic dustbin emptying; transparent bagless container |
| Suction adjustment | Automatic according to surface type; power boost on carpets |
| Main brush | V-shaped design to reduce hair tangling |
| Cleaning settings | Dual-grid cleaning, schedules, room selection, no-go zones |
| Obstacle detection | 3D |
| Automatic return and resume | Returns for charging at 15%; resumes from the stopping point at 80% |
| Filtration | Captures up to 99.7% of collected fine particles and allergens |
| Additional controls | Remote control and Apple Watch; watch supports start, stop, schedules and notifications |
| Do Not Disturb mode | Reduces notifications |
| EAN | 6924843235730 |
|---|
What is included?
The PROSCENIC Q20 Plus robot vacuum, docking station with dustbin emptying function, remote control, device cleaning brush, user manual, 2 HEPA filters, 2 side brushes and 2 mop pads.
Can I control the robot without the mobile app?
Yes. The included remote control operates the main functions. Voice control and Apple Watch control are also supported.
Does the station need dust bags?
No. The station uses a transparent 4 L bagless dust container.
