Bypass module for Shelly Dimmer Gen3 and Gen4
18 November: closed
Delivery options to:
Choose countryThe Shelly Bypass for Dimmer lets a Shelly Dimmer Gen3 or Gen4 dim lighting loads under 20 W when there is no neutral wire at the dimmer location.
The module fits inside the light fitting and measures 39 × 23 × 13 mm without its leads. The two leads connect to the dimmer output (O) and the neutral wire (N) at the fitting. The module is rated for a 220–240 V AC, 50 Hz supply.
| Manufacturer | Shelly |
|---|---|
| Model | Bypass for Dimmer |
| Device type | Dimmer bypass module |
| Compatibility | Shelly Dimmer Gen3, Shelly Dimmer Gen4 |
| Application | Installations with no neutral wire at the dimmer and a load under 20 W |
| Power supply | 220–240 V AC, 50 Hz |
| Power consumption | Less than 4 W |
| Dimensions | 39 × 23 × 13 mm (without leads) |
| Weight | 8 g |
| Number of leads | 2 (O, N) |
| Lead length | 65 ± 5 mm |
| Lead cross-section | 0.2 mm² (24 AWG) |
| Installation location | Inside the light fitting |
| Housing material | Plastic |
| Housing colour | Lime green |
| Lead colour | Black |
| Operating temperature | −20 °C to 40 °C |
| Operating relative humidity | 30–70% |
| Maximum operating altitude | 2 000 m above sea level |
| EAN | 3800238071639 |
|---|
Does the bypass itself need a neutral connection?
Yes, at the light fitting. Its two leads connect to the dimmer output (O) and neutral (N). This setup is intended for installations where there is no neutral wire at the dimmer location.




Gudri pirkumi vienuviet