Makita DHP490TJX9 18 V cordless combi drill, 2 × 5.0 Ah batteries
Delivery options to:
Choose countryThe Makita DHP490TJX9 kit provides an 18 V cordless combi drill for screwdriving and drilling in wood, steel and masonry. Its brushless motor and switchable hammer action support different tasks, with 2 × 5.0 Ah batteries and a fast charger included.
Control for drilling and screwdriving
A 2-speed all-metal planetary gearbox provides speeds up to 500 or 1 900 min⁻¹. Electronic speed control and 20 torque settings let you adjust operation to the material and task. Maximum torque is 65 Nm, with hard/soft joint torque ratings of 50/27 Nm.
- Drilling capacity: up to 38 mm in wood and 13 mm in steel and masonry.
- Bit changes: a keyless chuck accepts sizes from 1.5 to 13 mm.
- Visibility: an LED with pre-glow and after-glow illuminates the work area.
- Protection: XPT increases resistance to dust and water splashes, while the battery protection system helps prevent overload, overheating and deep discharge.
Included in the kit
Makita DHP490 cordless hammer driver drill, 2 × 18 V 5.0 Ah lithium-ion batteries, fast charger, MAKPAC size 2 case with insert and a MAKPAC organiser.
| Battery system | Makita LXT 18 V |
|---|---|
| Battery type | Lithium-ion |
| Motor | Brushless |
| No-load speed | 0–500 / 1 900 min⁻¹ |
| Maximum hard/soft joint torque | 50 / 27 Nm |
| Maximum torque | 65 Nm |
| Torque settings | 20 |
| Impact rate | 0–7 500 / 28 500 min⁻¹ |
| Drilling capacity in wood | 38 mm |
| Drilling capacity in steel | 13 mm |
| Drilling capacity in masonry | 13 mm |
| Chuck capacity | 1.5–13 mm |
| Dimensions (L × W × H) | 17.2 × 8.1 × 25.5 cm |
| Weight | 1.4 kg |
| Colour | Blue / black |
| Type | Hammer drill driver |
| Tool mounting system | Keyless drill chuck |
| Operating mode | Rechargeable battery |
| Maximum drilling capacity in concrete | 13 mm |
| Electronic fast-stop brake | Yes |
| Sound pressure level | 88 dB |
| Electronic speed stabilisation | Yes |
| LED light | Yes, with pre-glow and after-glow |
| Batteries included | 2 |
| Battery capacity | 5.0 Ah |
| Battery voltage | 18 V |
| Gearbox | Mechanical, 2-speed, all-metal planetary |
| XPT protection | Increased resistance to dust and water splashes |
| Battery protection | Against overload, overheating and deep discharge |
| EAN | 0197050022363 |
|---|
Are batteries and a charger included?
Yes. The kit includes 2 × 18 V 5.0 Ah lithium-ion batteries, a fast charger, a MAKPAC size 2 case with insert and a MAKPAC organiser.
Can it drive screws and drill masonry?
Yes. It has 20 torque settings for screwdriving and switchable hammer action for masonry drilling. The stated masonry drilling capacity is up to 13 mm.
Gudri pirkumi vienuviet
