DeWalt DCD703L2T-QW 12 V cordless drill driver kit
Delivery options to:
Choose countryThe DeWalt DCD703L2T-QW is a 12 V cordless drill driver with a brushless motor and 2 gears for drilling and screwdriving. Its overall length of just 15 cm and interchangeable holders help it fit narrow working areas.
Four interchangeable holders
The kit includes a 10 mm standard chuck, a 1/4" bit holder, a 1/4" eccentric head and a 1/4" angle head. All 4 holders can be changed without tools.
Speed and torque control
- 2 gears: no-load speeds of 0–425 and 0–1500 rpm, with variable speed and electronic speed stabilisation.
- 15 torque settings: maximum torque is 57.5 Nm.
- Drilling capacity: maximum drilling diameter is 10 mm in steel and 20 mm in wood.
- Lighting and monitoring: an LED illuminates the working area, while safety electronics continuously monitor battery temperature and current draw and provide discharge protection.
Included equipment
The kit comes with 2 DeWalt XR lithium-ion batteries, each rated at 12 V and 3.0 Ah, a DCB112 quick charger, a belt clip and a T STAK Box case. The tool also features a robust metal hook.
| Battery voltage | 12 V |
|---|---|
| Drill chuck capacity | 1.5–10 mm |
| No-load speed | 0–425 / 0–1500 rpm |
| Battery capacity | 3 Ah |
| Weight | 1.10 kg |
| Maximum torque | 57.5 Nm |
| Maximum drilling diameter in steel | 10 mm |
| Maximum drilling diameter in wood | 20 mm |
| Variable speed | Yes |
| Torque settings | 15 |
| Maximum no-load speed, 1st gear | 0–425 rpm |
| Hard torque | 57.5 Nm |
| Maximum no-load speed, 2nd gear | 1500 rpm |
| Type | Drill driver |
| Operating mode | Rechargeable battery |
| Tool mounting system | Keyless drill chuck with 1/4" internal hex drive |
| Battery type | Lithium-ion |
| Battery system | DeWalt XR 12V |
| Rechargeable batteries included | 2 |
| Colour | Black / yellow |
| Electronic speed stabilisation | Yes |
| LED light | Yes |
| Motor | Brushless |
| Interchangeable holders | 4; tool-free changes |
| Overall length | 15 cm |
| Metal hook | Yes |
| Safety electronics | Continuous battery temperature and current draw monitoring; discharge protection |
| EAN | 5035048748169 |
|---|
What is included in the kit?
The drill driver, a 10 mm chuck, a 1/4" bit holder, a 1/4" eccentric head, a 1/4" angle head, 2 XR lithium-ion batteries rated at 3.0 Ah / 12 V, a DCB112 quick charger, a belt clip and a T STAK Box case.
Are tools needed to change the holders?
No. All 4 interchangeable holders can be changed without tools.












Gudri pirkumi vienuviet